| Operational modes: |
DCC 14, 28, 128 speed steps |
| |
DCC long and short addresses |
| |
DCC traction address (Consist Mode) |
| |
DCC LGB pulse control |
| |
Automatic speed step detection |
| |
Lenz® LG 100, ROCO® brake unit |
| |
Lenz® ABC brake unit |
| |
ZIMO® HLU commands |
| |
DC analogue operation |
| |
Motorola® 14 speed steps |
| |
Motorola® 28 speed steps |
| |
Motorola® address 1 - 80 |
| |
Motorola® address 1 - 127 |
| |
Motorola® address 1 - 255 |
| |
M4 data protocol (mfx® compatible) |
| |
Selectrix® |
| |
Märklin® brake unit |
| |
AC analogue operation |
| |
Automatic detection of operational mode |
| Throttle: |
DC and coreless motors, AC motors with magnet |
| |
PWM frequency 40,00 kHz |
| |
Load control in digital operation |
| |
Load control in analogue operation |
| |
Adj. start / maximum speed in analogue operation |
| |
Mass simulation for 14 speed step operation |
| |
Autotune function for load control |
| |
DDC (Dynamic Drive Control) |
| |
Continious motor current 1,1A |
| |
Short circuit protection |
| Function outputs: |
Amplified function outputs with short-circuit protection 4 / 6 (PluX16) |
| |
Current of each output 250mA |
| |
Logic level outputs 2 (21MTC) |
| |
Output dimming |
| |
Light effects like Blinking lights, Marslight, Fire box flickering etc. |
| |
Time-controlled function outputs |
| |
Function Mapping V4.0 ESU (F0 - F28) |
| |
Function Mapping M4® compatible |
| |
Shunting mode (de-selectable) |
| |
ABV (de-selectable) |
| |
Serial protocol (for SUSI) |
| Programming: |
|
| DCC service mode programming modes |
(Register Mode, Address Only, Direct Mode) |
| |
DCC POM (Programming On the Main) |
| |
Programming mode for Märklin® 6021 |
| |
M4® configuration on the main track |
| Specials: |
M4® feedback system |
| |
RailCom® feedback system |
| |
RailComPlus® automatic recognition |
| |
Storage of current operational state (memory) |
| |
Motorola® wrong-direction bit |
| |
»PowerPack« energy storage optional |
| Dimensions in mm: |
21,4x15,5x5,5 |
Deutsch
