Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
The American Locomotive Company's model 244 prime mover was developed during the mid-1940s to power its post-war diesel locomotives. Interestingly, while Alco helped pioneer diesel technology dating back to the 1920s it had difficulty truly competing against Electro-Motive-Division due to reliability issues with its diesel engines. Before Alco began implementing the 244 in its locomotives the builder had spent most of the 1930s developing an earlier model that was used in most of its early switchers. The new prime mover was supposed to usher in a new era for Alco but instead saw it slip further behind EMD in the marketplace. During the early 1950s the manufacturer replaced the engine with the more reliable 251 that powered its Century series. It would prove to be the company's last engine as it exited the market before 1970.
This sound file would be appropriate for the following locomotives:
RS-2
RS-3
RSC-2
RSC-3
RSD-4
RSD-5
Although there are slight differences, this sound file could also be used in the following locomotives:
FA-1
FB-1
FA-2
FB-2
FPA-2
FPB-2
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 ALCO 12cyl 244
Uses our OLD-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan Single Chime
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Leslie RS3L
CV48=7 Leslie S3L #1
CV48=8 Leslie A125
CV48=9 Leslie A200
CV48=10 Leslie RS3K
CV48=11 Hancock Air Whistle
CV48=12 Wabco E2
CV48=13 Nathan M3H
CV48=14 Leslie S2M
CV48=15 Leslie Dual A125-A200
Bells:
CV48=0 Steel Bell
CV48=64 ALCO Bronze Bell
Add values from above for total CV48 value.
Default CV48 Value = 64
0 - ALCO 12cyl 244
0 - Nathan Single Chime
64 - ALCO Bronze Bell
Total 0+0+64 = 64
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
