Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
As the EMD 567s got worn, Many Railroads underwent rebuild programs to prolong the life of their locomotives. One Program in particular was the Uceta GP-16 program on the SCL. Starting in 1979 they took many of their GP7s, GP9s, and GP18s and replaced the existing 567 prime movers with 16cyl 645C Power Assemblies. This combination resulted in a unique sound never before released in the Model Railroad Market.
There were a number of these rebuild programs by many railroads. CN Had GP9RMs, The DM&IR had SD-Ms rebuilt from SD9's and SD18's and others. While there were different Exhuast configurations, This file will be very close to the following locomotives:
GP16
FP9U
GP9RM
SD9M
SD-M
GP7U (Some- Check your prototype)
The following locos were rebuilt from 567D Turbo locos, that have been de-turboed and repowered with the 645C Power Assemblies:
GP20E
GP20M
GP35M
GP35R
GP38M
SD18M
SD20-2
SD35R
SD20
**As rebuild programs tend to be unpredictable it is a good idea to check your specific prototype to be sure which prime mover was used.**
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 EMD 16cyl 645C
Uses our INTERMEDIATE-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Leslie RS3L
CV48=7 Leslie RS5T
CV48=8 Leslie A125
CV48=9 Nathan M3
CV48=10 Leslie RS3K
CV48=11 Nathan K5H
CV48=12 Leslie A-125
CV48=13 Nathan M3H
CV48=14 Leslie S3E
CV48=15 Leslie S5TRF
Bells:
CV48=0 EMD Steel Bell
CV48=64 EMD Bronze Bell
Add values from above for total CV48 value.
Default CV48 Value = 71
0 - EMD 16cyl 645C
7 - Leslie RS5T
64 - EMD Bronze Bell
Total 0+7+64 = 71
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
