Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
First introduced in the late 50's, the GE FDL is one of the most popular locomotive prime movers ever produced. Aside from a very few HDL prime movers installed in the AC6000CW's, FDL prime movers were still being put in every new GE locomotive until 2003 when the first Evolution Series was implemented.
Our GE 12cyl 7FDL Early Prime mover would be appropriate for the following locomotives:
U23B
U20C
U23C
U26C
Some newer GE 12cyl 7FDL equipped locomotive had a SLIGHTLY different sound due to a larger exhaust and other hardware. While we will be releasing that sound file shortly (#73438 GE 12cyl 7FDL Modern), this file will be a VERY close substitute until then. Those locomotives would include:
B23-7
BQ23-7
B30-7A
C30-7A
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 GE 12cyl 7FDL Early
Uses our INTERMEDIATE-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Leslie S3L #1
CV48=7 Leslie RS5T
CV48=8 A125
CV48=9 Nathan M3
CV48=10 Leslie RS3K
CV48=11 Nathan K5H
CV48=12 Leslie S2M
CV48=13 Nathan M3H
CV48=14 Leslie S3E
CV48=15 Leslie S5TRF
Bells:
CV48=0 GE Steel Bell
CV48=64 GE Steel Bell #2
Add values from above for total CV48 value.
Default CV48 Value = 9
0 - GE 12cyl 7FDL Early
9 - Nathan M3
0 - GE Steel Bell
Total 0+9+0 = 9
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
